Accessories Technical Information
Walling, Steps & Finishing Notes
Full installation advice and guidance can be obtained from our Group Technical Team.
Common to all Stonemarket Walling Products
Stonemarket recommends the use of Copings and Caps with all Walling Products. They also protect walls against the staining effect of rain for a period of time.
Common to all face Veneer Walling Products
Where a facing/veneer wall is used with a garden/soil/planting/aggregates behind it, a membrane must be installed at the rear of the wall to stop moisture draw through. Walls over 1.5m high need mechanical fixing. The correct drainage (such as weepholes) should be considered for any walling retaining soil.
Vintage Stone Walling
A 10mm joint width is recommended with this product. Due to tolerance of product, some sorting will be required before commencing installation.
Exilis Splitface Veneer Walling
Panels are in a Z cut format to hide joints, for a seamless finish.
Please note there is a slight tolerance in this.
This product is supplied with the correct amount of adhesive and primer.
Rio Walling
Corner Quoin Ends can be ordered via Stonemarket Order Select.
Please note this walling is only faced on one side. An external thin bed adhesive is recommended.
Coverage attianed if laid with minimal joints.
Copings & Caps
No drip grooves included on our range of copings.
Bullnose Steps
Stonemarket has a broad range of high performance natural stone steps, ranging from sandstone to marble and granite. They can be used to match Stonemarket natural stone paving products or to compliment concrete paving products.
Kerbs & Edging
The perfect edge restraints to co-ordinate with the Driveway products or contrast with other products within the Driveways range.
Trident and Avenu Kerb have a 45o splay.
Smallest radius for an internal kerb is 0.46m.
Smallest radius for external kerb is 0.62m.
When laying Pavekerb, KL protrudes 100-125mm and KS by 25-50mm.
Specific installation guidance must be followed. For further guidance contact Group Technical Services.
Smallest radius for external kerb is 0.62m.
When laying Pavekerb, KL protrudes 100-125mm and KS by 25-50mm.
Specific installation guidance must be followed. For further guidance contact Group Technical Services.
Our Jointing Range Selecting the right jointing compound is vital, as every Stonemarket jointing compound is made specifically for the material it will be installed with to create a strong and durable finish.
Use our installation matrix below to help determine the most effective jointing for your project.
Fastpoint: Coverage is based on 600 x 600 x 20mm paving unit. Please note: Not suitable for granite or marble. 24 month shelf life from date of manufacture.
Narrow Jointing Compound: Coverage varies based on joint width and paving product being installed. Minimum 20mm joint depth for paving. Please note: 24 month shelf life from date of manufacture.
Driveway Jointing Compound: Please note: 24 month shelf life from date of manufacture.